Filter
Top Products
6-19
Using the Fax Functions
Change the settings for sending and receiving faxes.
For details on the procedure for setting specifications or the
setting items, see the next items.
“Setting Procedure for Sending Faxes” (P.6-19)
“Setting Items” (P.6-19)
“Setting Procedure for Receiving Faxes” (P.6-21)
“Setting Items for the Receive Settings” (P.6-22)
“System Settings Procedure” (P.6-23)
“Setting Items” (P.6-24)
Setting Procedure for Sending Faxes
Specify the settings for sending faxes using the following
procedure.
This section describes the procedure for changing the setting
for “ECM TX” as an example.
Keys to be used for this operation
Menu
OK
1 Press [ ] (Menu).
2 Press [ ] or [ ] to select <Fax TX Settings>, and
then press [OK].
Menu
Preferences
Timer Settings
Copy Settings
Fax TX Settings
3 Press [ ] or [ ] to select <TX Function Settings>,
and then press [OK].
Fax TX Settings
Basic Settings
TX Function Settings
Fax Setup Guide
4 Press [ ] or [ ] to select <ECM TX>, and then
press [OK].
TX Function Settings
Change Defaults
ECM TX
Pause Time
Auto Redial
5 Press [ ] or [ ] to select <Off> or <On>, and
then press [OK].
ECM TX
Off
On
* When <Apply> appears in the screen, you must select <Apply>
and press [OK] after specifying the setting.
6 Press [ ] (Menu) to close the menu
screen.
The setting is complete.
Setting Items
The following settings are available for sending faxes.
Send/Receive Settings
Basic
Settings
“Register Unit Name” (P.6-20)
“Register Unit Telephone Number” (P.6-20)
“Select Line Type” (P.6-20)
“Public Line Connection” (P.6-20)
“Off-Hook Alarm” (P.6-20)
“Sender ID” (P.6-20)
TX Function
Settings
“Change Defaults” (P.6-20)
“ECM TX” (P.6-20)
“Pause Time” (P.6-21)
“Auto Redial” (P.6-21)
“Check Dial Tone Before Sending” (P.6-21)
Changing the Fax Settings (Items Specified Using the [Menu] Button)