Filter
Top Products
Preparation for Protocol Settings
2-4
Specifying the Network Settings
2
Settings from the Operation Panel
IMPORTANT
Settings specified from the operation panel become effective after the machine is
restarted, after the procedure.
1
Press [Menu].
2
Press [ (-)] or [ (+)] to select <NETWORK SETTINGS> ➞ press
[Set].
3
Press [ (-)] or [ (+)] to select <LAN SETTINGS> ➞ press [Set].
4
Press [ (-)] or [ (+)] to select <IP ADDRESS AUTO.> or <IP
ADDRESS>.
● If you want to allocate an IP address to the machine automatically:
❑
Select <IP ADDRESS AUTO.> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <ON> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <DHCP>, <BOOTP>, or <RARP> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <ON> or <OFF> ➞ press [Set].
● If you want to allocate a fixed IP address to the machine:
❑
Select <IP ADDRESS> ➞ press [Set].
❑ Enter the IP address number using the numeric keys ➞ press [Set].