Filter
Top Products
Setting Up a Computer for Printing
2-18
Specifying the Network Settings
2
6
If you are using LPD, change the port configuration information.
❑ Click the [Ports] tab to display the [Ports] sheet.
❑ Click [Configure Port].
❑ Select [LPR] under [Protocol], enter “lp” in [Queue Name] under [LPR Settings] ➞
click [OK].
NOTE
If you are using Raw, this step is not required as the default protocol setting is
<RAW>.
7
Click [OK] to enable the settings.
The printer destination settings are complete.