Filter
Top Products
Preparation for Protocol Settings
2-5
Specifying the Network Settings
2
5
Press [ (-)] or [ (+)] to select <SUBNET MASK> ➞ press [Set].
6
Enter the number using the numeric keys ➞ press [Set].
7
Press [ (-)] or [ (+)] to select <DEFAULT GATEWAY> ➞ press [Set].
8
Enter the number using the numeric keys ➞ press [Set].
9
Press [ (-)] or [ (+)] to select <ETHERNET DRIVER> ➞ press [Set].
10
Press [ (-)] or [ (+)] to select <AUTO> or <MANUAL>.
● If you want to specify the ethernet driver settings automatically:
❑
Select <AUTO> ➞ press [Set].
● If you want to specify the ethernet driver settings manually:
❑
Select <MANUAL> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <DUPLEX> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <HALF DUPLEX> or <FULL DUPLEX> for specifying
the desired communication mode ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <ETHERNET TYPE> ➞ press [Set].
❑ Press [ (-)] or [ (+)] to select <10 BASE-T> or <100 BASE-TX> for specifying the
desired ethernet type ➞ press [Set].
11
Press [Stop/Reset] to return to the standby display.