Filter
Top Products
74
PROJECTING AN IMAGE FROM AV EQUIPMENT
Selecting Aspect Ratio of the Projecting Image
(Screen aspect)
You can select among three aspect ratios of the projecting image according to the aspect
ratio of the projected screen.
You can project an image on the whole screen by setting [Screen aspect].
z You can set [Screen aspect] from menu. Refer to the section [Screen aspect] on the
menu for details (P101).
4:3
Select this when you use a screen with aspect ratio of 4:3.
The following table shows the available [Aspect] mode for each input signal.
16:9
Select this when you use a screen with aspect ratio of 16:9.
Select [4:3] from the [Aspect] menu if you want to project a video image with aspect ratio of
4:3 in this mode (P73).
The following table shows the available [Aspect] mode for each input signal.
Input signal Available [Aspect] mode
VIDEO
S-VIDEO
SCART
Full screen
Wide
COMPONENT
DIGITAL VIDEO
Full screen
Auto
Wide
Input signal Available [Aspect] mode
VIDEO
S-VIDEO
SCART
4:3
Wide
COMPONENT (480i/575i/480p/575p)
DIGITAL VIDEO (480p/575p)
4:3
Wide
COMPONENT (720p/1035i/1080i)
DIGITAL VIDEO (720p/1080i)
Wide
z [Auto screen color] may not correct the screen color properly. If such is the case, correct it
manually. (P98)