Filter
Top Products
E-95
5. Use fc to select
“Shortcut1”, and then press
E.
6. In response to the confirmation screen that appears,
press E(Yes).
• If you want to cancel this operation without assigning
anything to 1(Shortcut1) key, press E instead of
E in step 6.
u To configure the SHORTCUT2 key
1. Press m to enter the COMP Mode.
2. Input the formula shown below.
(FV – ((–PV) + (–PMT) ×
n)) ×
0.9 + ((–PV) + (–PMT) ×
n)
• “FV”, “PV” and “
n” are financial calculation variables
(VARS).
3. Perform the same operation as steps 4, 5, and 6 under
“To configure the SHORTCUT1 key” to assign the above
formula to “Shortcut2”.
u To use the configured shortcut keys in a calculation
Example: To calculate the value of the savings plan after
five years (
n = 60 months)
1. Press 1(Shortcut1).
• This enters the mode
(CMPD) and configures
the settings assigned to
the 1(Shortcut1) key,
and selects “
n” for input.
2. Input 60, and then press E.
• Since all other input is performed by the data assigned
to the 1 (Shortcut1) key, this is the only input
required. To calculate the value for a different length
of time, simply input the applicable number of months.
STO