Filter
Top Products
E-37
Inserting a Line
(1)On the STAT editor screen, move the cursor to the line that will
be under the line you will insert.
(2)Press 11(STAT)3(Edit).
(3)Press 1(Ins).
Important!
• Note that the insert operation will not work if the maximum number
of lines allowed for the STAT editor screen are already used.
Deleting All STAT Editor Contents
(1)Press 11(STAT)3(Edit).
(2)Press 2(Del-A).
• This clears all of the sample data on the STAT editor screen.
Note
•Note that you can perform the procedures under “Inserting a Line”
and “Deleting All STAT Editor Contents” only when the STAT editor
screen is on the display.
k STAT Calculation Screen
The STAT calculation screen is for performing statistical calculations
with the data you input with the STAT editor screen. Pressing the
A key while the STAT editor screen is displayed switches to the
STAT calculation screen.
The STAT calculation screen also uses Linear format, regardless of
the current input/output format setting on the calculator’s setup
screen.
k Using the STAT Menu
While the STAT editor screen or STAT calculation screen is on the
display, press 11(STAT) to display the STAT menu.
The content to the STAT menu depends on whether the currently
selected statistical operation type uses a single variable or paired
variables.
Single-variable Statistics Paired-variable Statistics