Filter
Top Products
E-44
k Solution Display
After inputting and registering values on the coefficient editor screen,
press = to display the solution(s) for the equation.
• Each press of = displays the next solution, if there is one. Pressing
= while the final solution is displayed returns to the coefficient
editor screen.
• In the case of simultaneous linear equations, you can use f and
c to switch the display between the solutions for X and Y (and
Z).
•When there are multiple solutions for a quadratic or cubic equation,
you can use the f and c keys to scroll the display between X1,
X2, and X3. The actual number of solutions depends on the
equation.
•Pressing A while a solution is displayed will return to the coefficient
editor screen.
• The display format of solutions is in accordance with the input/
output format and complex number display format settings of the
calculator’s setup screen.
• Note that you cannot transform values to engineering notation while
an equation solution is displayed.
Appendix Equation Calculation: <#066> to <#070>
Generating a Number Table
from a Function (TABLE)
All calculations in this section are performed in the TABLE Mode
(N4).
k Configuring a Number Table Generation
Function
The procedure below configures the number table generation
function with the following settings.
Function: f(x) = x
2
+
Start Value: 1, End Value: 5, Step Value: 1
LINE
(1)Press N4(TABLE).
(2)Input the function.
1
2