Filter
Top Products
41
Plug and Play
(USB port
models only)
RCVHDWUN
Single Use this sub-menu to turn plug-and-play
*1
on or off.
On*:
Select this option to turn on plug-and-play. This will allow the
projector detect when an external USB device is connected and
make that device the input source automatically.
Off:
Select this option to turn off plug-and-play.
USB Audio Out
(USB port
models only)
RCVHDWUN
Single When playing back a movie file stored on a USB memory device,
you can select audio output from the projector’s built-in speaker
or to the line output.
Speaker*:
Select to output movie file audio from the speaker.
Line:
Select to output movie file audio from the AV terminal.
HDMI Audio
Out
RCVHDWUN
Single Specifies whether the input audio signal should be output from the
projector’s built-in speaker or to the line output.
Speaker*:
Outputs the audio signal being input to the HDMI port from the
speaker.
Line:
Outputs the audio signal being input to the HDMI port from the
AV terminal.
High Altitude
RCVHDWUN
Single Use this sub-menu to turn the high-altitude fan speed setting on or
off in accordance with the altitude of the area where you are using
the projector.
On:
Select this setting when using the projector in a high altitude
(1,500 to 3,000 meters above sea level) area where air is thin.
This setting increases cooling efficiency.
Off*:
Select this setting at normal altitudes (up to 1,500 meters).
Important!
Do not use this projector at altitudes greater than
3,000 meters above sea level.
Timer Function
RCVHDWUN
Single Selecting this item displays the timer function menu. For details,
see “Presentation Timer” (page 21).
Restore Menu
Defaults
RCVHDWUN
Single This sub-menu returns all of the sub-menu items on the Option
Settings 2 main menu to their initial default settings.
*1 When plug-and-play is turned on, the projector will make that device the input source
automatically. For details about plug-and-play, see “USB Function Guide” on the bundled
CD-ROM.
Setting Name Input Setting Unit Description