Castelle 10031161 Modem User Manual


 
4
C
HAPTER
1: B
EFORE
Y
OU
B
EGIN
Do not stack anything on top of the cable modem. (See
the instructions on page 14 concerning stacking this
modem with 3Com OfficeConnect products.)
The temperature in the room where the cable modem
will be operating should be between 0 and 40°C (32
and 104°F). Relative humidity should be between 5 and
95%, non-condensing.
Familiarize yourself with all of the materials in this box.
Please read these installation instructions thoroughly
before installing your cable modem.
CAUTION: Your cable company will provide a cable
connection. Do not attempt any rewiring without first
contacting your cable company.
You Will Need These Items
Included:
Cable modem
Cable modem power supply
Analog modem, power supply, and DB-25 to DB-9 cable
(TMX Dialup Kit only)
RJ-45 network cable
Rubber feet and stacking clips kit
This Getting Started Guide
Not Included:
A PC running Windows
95 operating system (or later)
or a Macintosh
computer running the System 7.5
operating system (or later) with TCP/IP protocol installed
(see the following two sections for more information on
installing TCP/IP)
An active cable line
An active Ethernet port or network interface card (NIC)
installed in your computer
A 7/16 inch (or adjustable) wrench for securing the
cable line to the modem
A screwdriver, pushpins, and screws (for optional
wall-mounting) The screw heads should be at least 0.2”
(5mm) in diameter for them to be properly captured in