Filter
Top Products
4
T
ROUBLESHOOTING
AND
S
UPPORT
R
ESOURCES
Troubleshooting
The analog modem does not dial my cable company’s server
properly.
■
Make sure that the power supplies for both the analog
modem and the TMX are plugged into electrical outlets
and make sure the analog modem is turned on.
■
Make sure your phone line is active. Plug a telephone
into the analog phone jack and listen for a dial tone.
■
Make sure there are no devices between the analog
modem and the phone jack.
■
If you have voice mail, there may be messages waiting
for you, altering the dial tone. Answer any messages to
return the dial tone to normal.
■
Make sure you are dialing the correct access number for
your cable company’s cable modem service.
■
Make sure the telephone cord is plugged into the
analog modem you have connected to the TMX.
My computer went into “power save” mode. When it came
out of power save mode, my screen was frozen.
If the upstream (analog modem) connection is active when
a computer goes into power save mode, the computer may
freeze when coming out of power save mode. Either hang
up the analog modem before your computer goes into
power save mode or disable power save on your PC. If you
choose to disable power save, disable it in both the
Windows 95 Control Panel and the BIOS setup. To disable
power save in Windows 95, click Windows 95 Start, point
to Settings, and click Control Panel. Double-click the
Power icon and select OFF in the “Power Management”
box. Click Apply. To disable power save in the BIOS setup,
you usually must press a function key while booting up to