Filter
Top Products
Installing the FaxPress Xerox Interface
5—9
Configuring the FaxPress Xerox
Interface
Use the following procedure to configure your FaxPress Xerox Interface.
You will already be in the FaxPress Xerox Interface Configuration
screen if you have just finished installing the FaxPress Xerox Interface
software on the workstation you are using for it. If you have exited from
the Installation/Configuration program, you can access the configuration
utility by choosing this command:
Start>Programs>FaxPress>Add On Products>Xerox Interface>Configuration
See Accessing the FaxPress Xerox Interface Configuration Utility on
page 5-21
for details. Once you have accessed the FaxPress Xerox
Interface Configuration screen, follow these steps.
1. The tabs in this screen let you make settings for your FaxPress
Xerox Interface, so it can send and receive faxes from the Xerox
system via the FaxPress server, and establish the mappings for