Filter
Top Products
i4000 - Quad M-module carrier for VMEbus
User Manual Version: 1.2
AcQuisition Technology bv
P.O. Box 627, 5340 AP
Oss, The Netherlands Page 5 of 25
1. INTRODUCTION
1.1. VALIDITY OF THE MANUAL
This is edition 1.2 of the i4000 user manual and applies to the following boards:
• The i4000 VME M-module carrier board without P2 of revision R4 ( i4000 Rev 4 )
• The i4000 VME M-module carrier board with P2 of revision R2 ( i4000/R2 )
The revision can be found on the printed circuit board.
1.2. PURPOSE
This manual serves as an instruction for the operation of the i4000 M-module carrier board with VMEbus
interface. Some examples for using the i4000 within an APIS software environment can be found in the APIS
programmers manual.
1.3. SCOPE
The scope of this manual is the usage of the i4000 M-module Carrier for VMEbus.
1.4. DEFINITIONS, ACRONYMS AND ABBREVIATIONS
AcQ AcQuisition Technology bv
APIS AcQuisition Platform Interface Software
ESD Electronic Static Discharge
i4000 M-module carrier board for VMEbus
M-module Mezzanine I/O concept according to the M-module specification
VMEbus Versa Modular Eurocard bus
1.5. NOTES CONCERNING THE NOMENCLATURE
Hex numbers are marked with a leading “0x”-sign: for example: 0x20 or 0xff.
File names are represented in italic: filename.txt.
Code examples are printed in courier.
Active-low signals are represented by a trailing asterisks (i.e. IACK*).
1.6. OVERVIEW
In chapter 2 a description of the i4000 hardware can be found. Chapter 3 covers the installation and setup of
the card as well as mounting M-modules. The VMEbus interface can be found in chapter 4. In chapter 5 the
operation and the usage of the i4000 is described. Finally this document contains an annex containing a
bibliography, component image, technical data and the document history.