Filter
Top Products
VFS113 Rack/Desktop Model User’s Guide
2-12
Router Default Settings
Table 2-13 below lists the router default settings. If these settings meet your needs, you
can use your router now. If they do not, you can change the settings. See Chapter 3,
Configuring the Router.
❒
0 SCSI channel 0 activity Green Solid on when bus is active or busy
1 SCSI channel 1 activity Green Solid on when bus is active or busy
2 SCSI channel 2 activity Green Solid on when bus is active or busy
ST Ethernet Yellow Flashing or solid when 10BaseT link
is active or busy
LK Ethernet Yellow Solid when 10BaseT link is
connected
Table 2-13. Router default settings
Setting Default For more information, see
Mapping Mode AUTO Changing the Mapping Mode (AUTO or
FIXED) on page 3-20
Topology LOOP Selecting the Topology on page 3-7
Router’s loop ID SOFT Changing the Router’s Loop ID on page 3-8
Router’s LUN SOFT Changing the Router’s FC LUN on page 3-10
Router’s initiator ID
(SCSI ID) on each
channel
7 Changing the SCSI ID Assigned to Each
Router Channel on page 3-12
Scan Delay 0 seconds Changing the Scan Delay on page 3-15
Alarm ENABLED Enabling and Disabling the Alarm on
page 3-16
Table 2-12. LED status lights (Continued)
LED
Label Description Color Function