Filter
Top Products
LAN Configuration
D-7
Restarting the LAN Board
Option 4 from the Network Management System Console screen restarts the LAN board.
A screen will display notifying you that your system is restarting.
System Information screen
Option 5 from the Network Management System Console screen displays the About
Network Interface screen displays.
You can view this read-only screen to get information about the system.
Returning to the Router Administrator Software
Press Esc from the Network Management System Console screen to return to the Router
Administrator software. Either the initial screen or the System menu displays. If the initial
screen displays, press Enter to display the System menu.
You can now perform all of the functions described in this User’s Guide. All steps start
from the System Menu.
❒
4 Write Community SNMP write password. Default is Private.
ESC Exit Saves all changes and returns to the Network Management
System Console screen
Note: After rebooting the LAN connection you can return to the Password
screen by disconnecting and reconnecting the Telnet session.
Table D-3. System Configuration screen settings
Option Setting Description