Filter
Top Products
Page 12For technical questions, please call 1-800-444-3353.SKU 93765
INSPECTION, MAINTENANCE,
AND CLEANING
WARNING! Turn off the power
and disconnect the battery before
performing any inspection, mainte-
nance, or cleaning procedures.
Before each use,1. inspect the general
condition of the Video Inspection Sys-
tem. Check for loose screws, mis-
alignment or binding of moving parts,
cracked or broken parts, damaged
electrical wiring, and any other condi-
tion that may affect its safe operation.
If abnormal noise or vibration occurs,
have the problem corrected before
further use. Do not use damaged
equipment.
Before each use, 2. make sure the ter-
minal contacts on the Battery (4) are
clean and free of corrosion.
After each use, 3. wipe the Camera
Lens and all components to remove
any dirt and moisture. If neces-
sary, use a disinfectant to clean the
Camera (1), Ball Protector (9), and
Cable (3) after use. Then dry. Do not
immerse the Monitor (2), Battery (4),
Power Adapters (7), or any other ac-
cessory in liquid.
CAUTION! All maintenance,
service, or repairs not mentioned
in this manual must only be per-
formed by a qualied service tech-
nician.
REV 06d; 08l