Christie Digital Systems 020-000141-01 Projector User Manual


  Open as PDF
of 84
 
17
Installation
Lens Installation
Before setting up the projector, install Projection Lens on the projector.
Before installation, check where the projector is used and prepare a suitable lens. For the specifications of
Projection Lens, contact sales dealer where you purchased the projector.
- Do not use the optional lens below for this projector. Otherwise damages may result.
LENS MODEL NO. : 38-809041-02
- Lens installation and replacement should be made by the qualified service personnel.
- When setting the projector after lens installation, be sure to replace a Lens Cap to protect a
surface.
- When carrying or holding up the projector, be careful not to put your hands on lens part. It may
damage lens, cabinet, or mechanical parts.
Positioning Projector
This projector is designed to project on a flat projection
surface.
Note:
s
"RIGHTNESSINROOMHASAGREATINFLUENCEONPICTUREQUALITY
)TISRECOMMENDEDTOLIMITAMBIENTLIGHTINGINORDERTO
PROVIDETHEBESTIMAGE
SCREEN
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
 previous next