Christie Digital Systems 020-000141-01 Projector User Manual


  Open as PDF
of 84
 
24
Press the ON/STAND-BY button on the side control
or on the remote control, and “Power off?” appears
on the screen.
Press the ON/STAND-BY button on the side control
or on the remote control again to turn off the
projector. The LAMP indicator lights bright and the
READY indicator turns off. After the projector is
turned off, the cooling fans operate. You cannot turn
on the projector during this cooling down period.
1
2
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
COOLING FANS ARE RUNNING OR BEFORE THE
READY INDICATOR LIGHTS GREEN AGAIN.
OTHERWISE IT WILL RESULT IN SHORTENING OF
THE LAMP LIFE.
3
When the projector has cooled down enough, the
READY indicator lights green and then you can turn
on the projector. To turn off the MAIN ON/OFF
Switch, wait until the projector is completely cooled
down.
“Power off?” disappears after 4 seconds.
Note:
s7HENTHE/NSTARTFUNCTIONISSETTOh/NvTHEPROJECTOR
WILLBETURNEDONAUTOMATICALLYBYCONNECTINGTHE!#POWER
CORDTOAN!#OUTLETP
s4HERUNNINGSPEEDOFCOOLINGFANSISCHANGEDACCORDINGTO
THETEMPERATUREINSIDETHEPROJECTOR
s$ONOTPUTTHEPROJECTORINACASEBEFORETHEPROJECTORIS
COOLEDENOUGH
s)FTHE7!2.).'4%-0INDICATORBLINKSREDSEEh7ARNING
)NDICATORSvONPAGE
s4HEPROJECTORCANNOTBETURNEDONDURINGTHECOOLING
PERIODWITHTHE2%!$9INDICATORTURNEDOFF9OUCANTURNIT
ONAGAINAFTERTHE2%!$9INDICATORBECOMESGREENAGAIN
Turning Off the Projector
DO NOT OPERATE THE PROJECTOR CONTINUOUSLY
WITHOUT REST. CONTINUOUS USE MAY RESULT IN
SHORTENING THE LAMP LIFE.
Basic Operation
4
Unplug the AC power cord from the AC outlet.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
 previous next