Christie Digital Systems 020-000141-01 Projector User Manual


  Open as PDF
of 84
 
51
Lamp control
Choose the running speed of cooling fans from the following
options.
Normal ....... Normal speed.
Max ........... Faster than the normal speed.
Fan control
This function allows you to change the brightness of the screen.
Auto . . . . . Brightness according to the input signal.
Normal . . . Normal brightness.
Eco . . . . . . Lower brightness. Lower brightness reduces
the lamp power consumption and extends the
lamp life.
Setting
This Projector is equipped with 2 Projection Lamps and the
number of using lamps can be switched to 2 lamps or 1 lamp.
Using 1 lamp maintains the life of Projection Lamps.
To change over Lamp Mode
Set "2 lamps mode" or "1 lamp mode" by pressing the Point

buttons. When the Lamp Mode is switched from "2 lamps mode"
to "1 lamp mode", the image becomes a little darker. When the
Lamp Mode is switched from "1 lamp mode" to "2 lamps mode",
the image becomes brighter gradually.
Note:
s7HENNEITHER OFTHETWOLAMPSISLIGHTEDTHE
PROJECTORWILLSHUTDOWNAUTOMATICALLY
s7HENEITHEROFTHETWOLAMPSDOESNOTLIGHTUP
THE,!-02%0,!#%INDICATORBLINKSORANGE
ANDTHEPROJECTORWILLLIGHTTHEOTHERAUTOMATICALLY
s!FTERCHANGINGTHE,AMP-ODEITCANNOT BE
SWITCHEDAGAINFORSECONDS
Lamp mode
Filter control
You can replace the filter with this function. Press the SELECT
button at Filter control to display a confirmation box. To replace,
press the SELECT button at “YES” and the electrically operated
filter starts to scroll.
You can also replace the filter by using the remote control
(p. 30).
Note:
s&ILTERREPLACEMENTICONANDh0LEASEWAITv
MESSAGEAPPEARONTHESCREENWHENTHEFILTERIS
BEINGSCROLLED
s
4HEFILTERCANNOTBEREWOUND
s7HENTHEFILTERISREPLACEDTHETOTALACCUMULATED
TIMEOFTHEFILTERUSEISAUTOMATICALLYSETTO
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
 previous next