Filter
Top Products
Section 2: INTRODUCTION
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)
2-8
2.5 LED Status Indicators
The LED status indicators are located on the right side of the projector. Each
LED is defined below.
• LIGHT LED
• STATUS LED
LED Status Projector State
Red (flashing) When projector has lost over 60% initial luminance
Orange (solid) Laser diode time has expired
Green (solid) Laser diode is on and operating correctly
Off Laser diode is off
LED Status Projector State
Off AC power is off (without AC plug in)
Off, but keypad LED
is on
AC has been applied, projector is in standby mode
Green (solid) Projector is powered up and operating normally
Green (flashing) Projector communications
Orange (solid)
Non-portrait mode used
NOTE: Please refer to section 3.5.
Orange (flashing) Projector is in cool down mode or startup mode
Green (flashing) /
Red (flashing)
Projector is in flash (LAN) update state
Red (solid) Over-temperature
Red (flashing) Fan failure