Filter
Top Products
Section 3: INSTALLATION
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)
3-3
3.3 Turn the Projector On
1. Ensure that the power cord and signal cable are securely connected. The
Power button on the built in keypad is illuminated.
2. Turn on the projector by pressing " " on the remote control or press " "
on the built-in keypad. The Status LED is Orange with a long blink.
3. Turn on the source. Select Input Key on the remote control to select an
input source (VGA, BNC, HDMI, Component, S-Video or Composite
Video).
4. The projector detects the source you selected and displays the image.
NOTE:
The first time the projector is used, the preferred language may be selected from the main menu after the startup screen is dis-
played.
3.4 Turn the Projector Off
1. Press " " on the built-in keypad or on the remote control to turn off the
projector. A warning message will appear on the displayed image.
2. Press " " again to confirm your selection. If you do not press " " again,
the warning message will disappear after 10 seconds.
1
1
2
1
3
Status LED
1
2
1
Power on
1
2
Input Key
1
3
Power on
1
2