Filter
Top Products
Section 4: OPERATION
GS Series User Manual
020-000724-01 Rev. 1 (05-2014)
4-26
• Restart Network
Execute a Network restart. This will not change any of the network settings.
• Network Factory Reset
Execute a network factory reset. Network settings will be reset to the
following default values:
- Projector Name = Christie@ + Serial Number
- Show Network Messages = ON
- LAN Settings:
- Manual
- IP Address = 192.168.0.100
- Subnet Mask = 255.255.255.0
- Default Gateway = 192.168.0.100
- WLAN Settings:
- Enabled
- Start IP = 192.168.1.100
- End IP = 192.168.1.120
- Subnet Mask = 255.255.255.0
- Default Gateway = 192.168.1.100
- SNMP Settings:
- SNMP Read Communication = private
- Trap IP Address = 0.0.0.0
- SMTP IP Address = 0.0.0.0
- All other settings are cleared/blanked
- Trap Configuration:
- All items = SNMP Trap + Email
• LAN Setting Panel
- Select if the projector must obtain an automatically assigned IP address
through DHCP or if the user will set the address manually.
- Enter the IP address, netmask, and default gateway address for the
TCP/IP setting.
• WLAN Setting Panel
- Select if the wireless LAN of the projector is enabled or disabled.