Filter
Top Products
4
23. Remove the screws and the cargo tie downs.
24. Remove the quarter trim panel (1), by carefully pulling
at the clip locations (3).
NOTE: The load floor on Jeep Liberty must be removed in order to route the WiFi router harness. Repeat steps
11 through 24 on the drivers side to remove the load floor assembly.
25. Remove the lift gate opening scuff plate.
26. Liberty only, remove the nuts (2) and lift the rear of
the floor panel (1) up and rearward to release from the
body hooks (4).
27. Access the storage compartment.
Oct 16, 2009 K6860899 Rev. 1