Filter
Top Products
Command Summary
Cisco Micro Hub User Guide
3-12
Commands are defined and described in the format shown below:
show hub information
Syntax: show hub information [hub id]
Mode: Guest
Description: Displays information about one or more hubs in a stack.
Command Keyword Definition
• hub id — (Optional) The number of the hub in the stack. An integer
between 1 and 5. To determine the number of the hub, use the position
of the hub in the order from first to last hub connected through the rear
panel IN and OUT ports. If no number is entered, information about
all hubs in the stack will be displayed.
The display appears as follows:
hub> show hub info
Hub ID Type H/W ver F/W ver SNMP-Agent
-------------------------------------------
1 1503 1.0 1.01 Active
2 1502 1.0 1.01 No
3 1503 1.0 1.01 Inactive
Command Display Definitions
• Hub ID—Number of the hub in the stack, from top to bottom.
• Type—Model number of the hub: 1502 or 1503.
• H/W ver—Hardware version of the hub.
• F/W ver—Firmware version of the hub.
• Agent—Whether or not the hub contains an SNMP.
The name of the command.
How the command is entered.
Keywords in [square brackets] are
optional. Keywords in {curly brackets}
are required. Enter keywords shown in
bold exactly as they appear. Keywords
shown in italics are values that are
provided by you.
What command mode you must be in to enter the command.
Definitions of
keywords used in
the command
syntax.
Example of a
command display.
Definitions of fields
that are shown in
command displays.
S5974
Describes the
command. Some
commands may not
require all of the
information shown
here.