Filter
Top Products
Command Summary
Cisco Micro Hub User Guide
3-30
ip address
no ip address
Syntax: ip address {ip-address} [subnet mask] [gateway ip]
Mode: Administrator
Description: Configures the IP parameters for the hub.
Command Keyword Definitions
• ip-address—IP address of the hub. The default value is 0.0.0.0.
• subnet-mask—IP subnet mask of the hub. The default value is
255.255.255.0.
• gateway-ip—IP address of the gateway used by the hub. The default value is
xxx.xxx.xxx.254, where xxx.xxx.xxx are the same fields as the first three
fields of the ip-address field. The gateway address is usually the IP address
of a router on the same LAN as the hub.
Syntax: no ip address
Mode: Administrator
Description: Resets the hub with the default IP address (0.0.0.0), the default subnet mask
(255.255.255.0), and the default gateway address (0.0.0.0).