Filter
Top Products
Command Summary
Cisco Micro Hub User Guide
3-38
port operation
Syntax: port-operation {hub id} {port id} {enable | disable}
Mode: Administrator
Description: Enables or disables any port on any hub in the stack.
Command Keyword Definitions
• hub id—Number used to identify the hub in a stack. An integer between 1
and 5. Read the section “Hub ID Numbers” earlier in this chapter for
information about how to determine hub ID numbers.
• port id—Number of the port on the hub, based on the yellow label on the
rear panel of the hub. A number from 1 to 8.
• enable—Enables the port.
• disable—Disables the port.