Filter
Top Products
13
Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
78-13892-03
March 2002
Internal CompactFlash Memory Card Installation and Removal
Figure 12 Removing the Cover from a Cisco 3725
Removing an Internal CompactFlash Memory Card
Cisco 2691 routers, Cisco 3631 routers, and Cisco 3700 series routers have an internal connector on the
CPU/mainboard that may hold a CompactFlash memory card.
After removing the plug-in CPU/mainboard or the chassis cover as described in the “Removing a Plug-in
CPU/Mainboard” section on page 7 or in the “Removing the Chassis Cover” section on page 9, complete
the following steps to remove an internal CompactFlash memory card from the router:
Step 1 Locate the CompactFlash memory card on the CPU/mainboard. (See Figure 4, Figure 5, Figure 6, or
Figure 7.)
Step 2 If there is a retention screw, remove it from the standoff, using the Phillips screwdriver; save the
retention screw for reinstallation.
Step 3 Carefully pull the CompactFlash memory card free from the connector.
1 Lift cover 2 Slide cover
62488
1
2