Filter
Top Products
16
Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
78-13892-03
March 2002
Internal CompactFlash Memory Card Installation and Removal
Figure 14 Installing the Front Panel on a Cisco 3745 Router
Reinstalling the Cover on a Cisco Router
Caution Before reinstalling the cover on the router, make sure that all cables are secured, and are not in danger
of being pinched or cut.
This section describes how to reinstall the router cover. You need a number 2 Phillips screwdriver or flat
blade screwdriver to complete this procedure:
Step 1 Place the chassis on a flat surface.
Step 2 Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
chassis. (See Figure 15, Figure 16, or Figure 17.)
Step 3 Center the cover over the chassis and lower it onto the chassis.
Hinges
62782
Access door
Front panel
1
2