Filter
Top Products
Appendix A Specifications
Catalyst 4510R Switch Specifications
A-8
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Note The blank line card (C4K-SLOT-CVR-E) must be installed when either of the
following two situations occur:
• If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor
Engine
6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E
(WS-X45-SUP6L-E) installed in slot
1 and slot 2 is empty, you must install
the blank line card (C4K-SLOT-CVR-E) in slot
2 rather than a blank
faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot
2 opening
does not direct sufficient airflow to adequately cool the Supervisor
Engine
6-E or the Supervisor Engine 6L-E.
• If your Catalyst 4507R or Catalyst 4510R switch chassis has a Supervisor
Engine
6-E (WS-X45-SUP6-E) or a Supervisor Engine 6L-E
(WS-X45-SUP6L-E) installed in slot
2 and slot 1 is empty, you must install
the blank line card (C4K-SLOT-CVR-E) in slot
1 rather than a blank
faceplate (C4K-SLOT-CVR) . A blank faceplate covering the slot
1 opening
does not direct sufficient airflow to adequately cool the Supervisor
Engine
6-E or the Supervisor Engine 6L-E.
Airflow
Switch Right to left
Power supply Front to back
Power
PoE supplied –48 VDC
Power to Modules and Fans 12 VDC
Power to backplane components 3.3 VDC
Redundancy
Supervisor engine yes
Power supply 1 + 1
Table A-4 Catalyst 4510R Switch Specifications (continued)
Item Specification