Filter
Top Products
Chapter 2 Site Planning
Safety Overview
2-8
Catalyst 4900 Series Switch Installation Guide
78-18039-02
Warning
This equipment must be grounded. Never defeat the ground conductor or
operate the equipment in the absence of a suitably installed ground conductor.
Contact the appropriate electrical inspection authority or an electrician if you
are uncertain that suitable grounding is available.
Statement 1024
Note To completely de-energize the system, unplug the power cord.
• Always use caution when lifting heavy equipment. See the “Lifting the
Chassis Safely” section on page 3-5 before lifting the switch.
• Always turn all power supplies off by unplugging all power cords before
installing or removing a chassis.
• Keep the chassis area clear and free of dust during and after installation.
• Keep tools and chassis components off of the floor and away from foot traffic.
• Avoid wearing jewelry (including rings and chains) or other items that could
get caught in the chassis. Avoid wearing any loose clothing, or securely fasten
items such as ties, scarves, or sleeves.
• Install the system in compliance with the following local and national
electrical codes:
–
United States—National Fire Protection Association (NFPA 70); United
States National Electrical Code
–
Canada—Canadian Electrical Code, Part I, CSA C22.1
–
Other countries—International Electrotechnical Commission (IEC)
60364, Part 1 through Part 7
Working Safely with Electricity
Follow these basic guidelines when working with any electrical equipment:
• Locate the emergency power-off switch for the room in which you are
working before beginning installation.
• Disconnect all power and external cables before installing or removing a
chassis.