Filter
Top Products
1-3
Cisco Wide Area Application Engine 511 and 611 Hardware Installation Guide
OL-7220-02
Chapter 1 Introducing the Cisco Wide Area Application Engine
Introduction
Figure 1-2 WAE-611 Back Panel with SCSI Port Connector
WAE-511 and 611 models can be configured with either a Fibre Channel adapter
or an MPEG A/V decoder adapter. These adapters are user-replaceable and are
installed in PCI-X slot 1 on the back panel.
Figure 1-3 shows the WAE-511 and WAE-611 back panel with a Fibre Channel
adapter installed in slot PCI 1, and Figure 1-4 shows the WAE back panel with an
MPEG A/V decoder adapter installed in slot PCI 1.
Figure 1-3 WAE-511 and WAE-611 Back Panel with Fibre Channel Adapter
Figure 1-4 WAE-511 and WAE-611 Back Panel with MPEG A/V Decoder Adapter
124684
SCSI port connector
124656115771