![](http://pdfasset.owneriq.net/3/3b/33bf3f6e-ef3a-4687-824d-925c4f9019ad/33bf3f6e-ef3a-4687-824d-925c4f9019ad-bg16.png)
Configure the 802.11b/g Radio
Complete these steps:
Click Wireless located at the top of the WLC and verify that all access points under Admin Status are
set to Enable.
Figure 14
1.
Click Network (located near 802.11b/g).2.
Click AutoRF.3.
Use AutoRF to create a complete coverage with non−overlapping RF channel and a transmit power.
In order to do this, select Automatic for both RF Channel Assignment and Tx Power Level
Assignment.
Figure 15
4.