Cisco Systems 800 Network Card User Manual


 
T1, E1 and G.703 Multiflex Trunk Voice and WAN Interface Cards
Network Modules for Cisco 3700, 3600 and 2600XM series
89
Product Description
Supported Platforms
and Minimum
IOS Versions Comments
VWIC-2MFT-T1
Two-port RJ-48 Multiflex
Trunk-T1 Voice/WAN
Interface Card
This module supports
voice, data, and integrated
voice/data applications.
For data applications, the
VWIC provides a two-port
WAN Interface Card (WIC)
for T1/FT1 with an
integrated DSU/CSU. For a
packet voice solution, the
VWIC provides a two-port
Voice Interface Card (VIC)
with integrated DSU/CSU,
that combines with the
Digital T1/E1 Packet Voice
Trunk Modules
Modular Router Solutions
Serial & Legacy
Concentration
Voice & Fax
3700 series - 12.2(8)T
3660 series – 12.0(5)XK
3640 – 12.0(5)XK
3620 – 12.0(5)XK
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.0(5)XK
2610 series – 12.0(5)XK
1760 – 12.2(4)YB
1751 – 12.2(4)YB
1721 – Future
When used in a Cisco 3600
series router, requires one
of the following network
modules: NM-2W, NM-
1FE2W, NM-2FE2W,
NM-1FE1R2W, NM-1A-
OC3MM-1V,
NM-1A-OC3SMI-1V, NM-
1A-OC3SML-1V or
NM-HDV.
Minimum IOS version may
vary depending on
application.
VWIC-2MFT-T1-DI
Dual-port RJ-48 Multiflex
Trunk-T1 Voice/WAN
Interface Card with drop
and insert
This module supports
voice, data, and integrated
voice/data applications.
For data applications, the
VWIC provides a dual-port
WAN Interface Card (WIC)
for T1/FT1 with an
integrated DSU/CSU. For a
packet voice solution, the
VWIC provides a dual-port
Voice Interface Card (VIC)
with integrated DSU/CSU,
that combines with the
Digital T1/E1 Packet Voice
Trunk Modules. For
multiplexed voice and data
applications, this module
provides a dual-port VWIC
T1/FT1 with Drop and
Insert multiplexer.
Modular Router Solutions
Serial & Legacy
Concentration
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.0(5)XK
3640 – 12.0(5)XK
3620 – 12.0(5)XK
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.0(5)XK
2610 series – 12.0(5)XK
1760 – 12.2(4)YB
1751 – 12.2(4)YB
1721 – Future
When used in a Cisco 3600
series router, requires one
of the following network
modules: NM-2W, NM-
1FE2W, NM-2FE2W,
NM-1FE1R2W, NM-1A-
OC3MM-1V,
NM-1A-OC3SMI-1V, NM-
1A-OC3SML-1V or
NM-HDV.
Minimum IOS version may
vary depending on
application.
AccessRouter_Qxd8 4/19/02 5:25 PM Page 89