Filter
Top Products
Analog Voice Interface Cards
Network Modules for Cisco 3700, 3600 and 2600XM series
95
Product Description
Supported Platforms
and Minimum
IOS Versions Comments
VIC-2E/M
Two-port - E&M Voice
Interface Card
The two-port E&M voice
interface card for Cisco
voice/fax network modules
is used to connect to PBX
or key system trunk lines.
This voice interface card
works with existing phone
and fax equipment to
provide voice and fax
services over IP, and is
compatible with H.323
standard for audio- and
videoconferencing.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
ISDN BRI Voice Interface Cards
Product Description
Supported Platforms
and Minimum
IOS Versions Comments
VIC-2BRI-NT/TE
Two Port BRI ISDN Voice
Interface Card Terminal
Side or Network Side
This two port ISDN Terminal
Side or Network Side Basic
Rate Interface (BRI) Voice
Interface Card (VIC)
connects directly to PSTNs
and PBX/PABXs and
supports both on-premise
and off-premise
connections. The VIC-2BRI-
NT/TE supports a total of
four voice channels in a
single interface card via two
RJ-45 physical ports, and
enables toll-bypass and
voice over packet features.
Modular Router Solutions
Voice & Fax Integration
3700 series - Future
3660 series – 12.1(3)XI
3640 – 12.1(3)XI
3620 – 12.1(3)XI
2691 – 12.2(8)T1
2600XM series – 12.2(x)
mainline (future), 12.2(8)T1
2650 series – 12.1(3)XI
2620 series – 12.1(3)XI
2610 series – 12.1(3)XI
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
VIC-2BRI-S/T-TE
Two Port BRI ISDN Voice
Interface Card
This two port ISDN, S/T,
Terminal Side, Basic Rate
Interface (BRI) Voice
Interface Card (VIC)
connects directly to PSTNs
and supports both on-
premise and off-premise
connections. The VIC-2BRI-
S/T-TE supports a total of
four voice channels in a
single interface card via two
RJ-45 physical ports, and
enables toll-bypass and
voice over packet features.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.0(7)XK
3640 – 12.0(3)T
3620 – 12.0(3)T
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.0(3)T
2610 series – 12.0(3)T
1760 – Not Available
1751 – Not Available
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
Requires an IOS “PLUS”
feature set.
AccessRouter_Qxd8 4/19/02 5:25 PM Page 95