Filter
Top Products
Analog Voice Interface Cards
Network Modules for Cisco 3700, 3600 and 2600XM series
94
Product Description
Supported Platforms
and Minimum
IOS Versions Comments
VIC-2FXO-M2
Two-port – FXO Voice
Interface Card with Battery
Reversal and Caller ID
support – for Europe
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections in
Europe only. This voice
interface card supports all
features of VIC-2FXO and
in addition Battery
Reversal, Power Denial
and Caller ID.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
VIC-2FXO-M3
Two-port – FXO Voice
Interface Card- for
Australia
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections for
Australia only. This voice
interface card works with
existing phone and fax
equipment to provide
voice and fax services over
IP, and is compatible with
H.323 standard for audio-
and videoconferencing.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
VIC-2DID
Two-port Direct Inward
Dial voice/fax interface
card
Modular Router Solutions
Voice & Fax Integration
33700 series – 12.2(8)T
3660 series – 12.1(5)XM1
3640 – 12.1(5)XM1
3620 – 12.1(5)XM1
2691 – 12.2(8)T1
2600XM series – 12.2(x)
mainline (future), 12.2(8)T1
2650 series – 12.1(5)XM1
2620 series – 12.1(5)XM1
2610 series –12.1(5)XM1
1760 – 12.2(2)XK
1751 – 12.2(2)XJ
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
AccessRouter_Qxd8 4/19/02 5:25 PM Page 94