Filter
Top Products
Analog Voice Interface Cards
Network Modules for Cisco 3700, 3600 and 2600XM series
93
Product Description
Supported Platforms
and Minimum
IOS Versions Comments
VIC-2FXO
Two-port - FXO Voice
Interface Card
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections. This
voice interface card works
with existing phone and
fax equipment to provide
voice and fax services over
IP, and is compatible with
H.323 standard for audio-
and videoconferencing
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.0(5)T
3640 – 11.3(1)T
3620 – 11.3(1)T
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 11.3(2)XA
2610 series – 11.3(2)XA
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
VIC-2FXO-EU
Two-port - FXO Voice
Interface Card- For Europe
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections for
Europe only. This voice
interface card works with
existing phone and fax
equipment to provide
voice and fax services over
IP, and is compatible with
H.323 standard for audio-
and videoconferencing.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.0(5)T
3640 – 11.3(6)T
3620 – 11.3(6)T
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 11.3(6)T
2610 series – 11.3(6)T
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
VIC-2FXO-M1
Two-port – FXO Voice
Interface Card with Battery
Reversal and Caller ID
support
The two-port FXO
voice/fax interface card for
Cisco voice/fax network
modules is used to
connect to PBX or key
system, and to provide off-
premise connections. This
voice interface card
supports all features of
VIC-2FXO and in addition
Battery Reversal, Power
Denial and Caller ID.
Modular Router Solutions
Voice & Fax Integration
3700 series - 12.2(8)T
3660 series – 12.1(2)XH
3640 – 12.1(2)XH
3620 – 12.1(2)XH
2691 – 12.2(8)T1
2600XM series – 12.1(14)
mainline, 12.2(x) mainline
(future), 12.2(8)T1
2650 series – 12.1(3)T
2620 series – 12.1(2)XH
2610 series – 12.1(2)XH
1760 – 12.2(2)XK
1751 – 12.1(5)YB
1721 – Not Available
When used in a Cisco 2600
or 3600 series router,
requires a voice/fax
network module: NM-1V
or NM-2V.
When used in a 1751 or
1760 series router,
requires a DSP module.
Requires an IOS “PLUS”
feature set.
AccessRouter_Qxd8 4/19/02 5:25 PM Page 93