Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
Appendix C Cable and Port Specifications
MGMT 10/100 Ethernet Port
C-6
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
MGMT 10/100 Ethernet Port
The MGMT 10/100 Ethernet port is an Ethernet port with an RJ-45 connector.
You can use a modular, RJ-45, straight-through UTP cable to connect the
management port to an external hub, switch, or router (see Figure C-1).
Figure C-1 RJ-45 Interface Cable Connector
Table C-5 Port Mode Signaling and Pinouts for Modem with DB-25
Connection
COM1 Port
RJ-45 to DB-9
Terminal
Adapter
RJ-45 to RJ-45
Rollover Cable
RJ-45 to DB-25
Modem Adapter Modem
Signal DB-9 Pin RJ-45 Pin RJ-45 Pin DB-25 Pin Signal
CTS 8 8 1 5 CTS
DSR 6 7 2 8 DCD
RxD 3 6 3 3 RxD
GND 5 5 4 7 GND
GND 5 4 5 7 GND
TxD 2 3 6 2 TxD
DTR 4 2 7 20 DTR
RTS 7 1 8 4 RTS
1 Pin 1 2 Pin 8
94971
1
2
RJ-45 (both ends)