Filter
Top Products
Send documentation comments to mdsfeedback-doc@cisco.com.
vii
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Contents
Starting Up the Switch 2-17
Connecting the Power Supplies 2-18
Powering Up the Switch and Verifying Component Installation 2-19
Removing and Installing Components 2-21
Removing and Installing Switching and Services Modules 2-22
Removing a Switching or Services Module from Slot 2 2-25
Installing a Switching or Services Module in Slot 2 2-25
Verifying Installation of a Switching or Services Module in Slot 2 2-27
Removing and Installing Power Supplies 2-27
Removing a Power Supply 2-28
Installing a Power Supply 2-29
Removing and Installing the Fan Module 2-31
Removing a Fan Module 2-32
Installing a Fan Module 2-32
CHAPTER
3 Connecting the Cisco MDS 9216 Switch 3-1
Preparing for Network Connections 3-2
Connecting to the Console Port 3-2
Connecting to the COM1 Port 3-4
Connecting to the MGMT 10/100 Ethernet Port 3-6
Connecting to a Fibre Channel Port 3-7
Installing an SFP Transceiver and Fiber Optic Cable 3-9
Removing an SFP Transceiver and Fiber Optic Cable 3-10
Maintaining SFP Transceivers and Fiber Optic Cables 3-10
APPENDIX
A Troubleshooting A-1
Getting Started A-1
Solving Problems at the Component Level A-2
Identifying Startup Problems A-3