Filter
Top Products
SRB Configuration Examples
Configuring Source-Route Bridging BC-145
To maintain the SRB network, use any of the following commands in privileged EXEC mode:
In addition to the EXEC-mode commands to maintain the SRB network, you can use the following
command in global configuration mode:
SRB Configuration Examples
The following sections provide SRB configuration examples:
• Basic SRB with Spanning-Tree Explorers Example
• SRB with Automatic Spanning-Tree Function Configuration Example
• Optimized Explorer Processing Configuration Example
• SRB-Only Example
• SRB and Routing Certain Protocols Example
• Multiport SRB Example
• SRB with Multiple Virtual Ring Groups Example
• SRB over FDDI Configuration Examples
• SRB over FDDI Fast-Switching Example
• SRB over Frame Relay Configuration Example
• Adding a Static RIF Cache Entry Example
• Adding a Static RIF Cache Entry for a Two-Hop Path Example
• SR/TLB for a Simple Network Example
• SR/TLB with Access Filtering Example
show span Display the spanning-tree topology
for the router.
show sse summary Display a summary of Silicon Switch
Processor (SSP) statistics.
Command Purpose
clear netbios-cache Clear the entries of all dynamically
learned NetBIOS names.
clear rif-cache Clear the entire RIF cache.
clear source-bridge Clear the SRB statistical counters.
clear sse Reinitialize the SSP on the Cisco
7000 series.
Command Purpose
source-bridge tcp-queue-max number Limit the size of the backup queue
for RSRB to control the number of
packets that can wait for transmission
to a remote ring before they start
being thrown away.
Command Purpose