Filter
Top Products
Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-313
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
Figure 131 illustrates a DLSw+ configuration with local acknowledgment. Because the RIF is
terminated, the ring group numbers do not have to be the same.
Figure 131 DLSw+ with Local Acknowledgment—Simple Configuration
Router A
source-bridge ring-group 10
!
dlsw local-peer peer-id 10.2.25.1
dlsw remote-peer 0 tcp 10.2.5.2
interface loopback 0
ip address 10.2.25.1 255.255.255.0
!
interface tokenring 0
no ip address
ring-speed 16
source-bridge 25 1 10
source-bridge spanning
Router B
source-bridge ring-group 12
dlsw local-peer peer-id 10.2.5.2
dlsw remote-peer 0 tcp 10.2.25.1
interface loopback 0
ip address 10.2.5.2 255.255.255.0
!
interface tokenring 0
no ip address
ring-speed 16
source-bridge 5 1 12
source-bridge spanning
Token
Ring
25
3
7x5
3x74
S3241
Token
Ring
5
10.2.25.1 10.2.5.2
Router A
Router B
Ring Group
10
Ring Group
12