Filter
Top Products
Configuring Data-Link Switching Plus
DLSw+ Configuration Examples
BC-318
Cisco IOS Bridging and IBM Networking Configuration Guide
78-11737-02
no ip address
ring-speed 16
source-bridge 92 1 2000
source-bridge spanning
!
.interface tokenring 0/2
no ip address
ring-speed 16
source-bridge 93 1 2000
source-bridge spanning
!
router eigrp 202
network 150.150.0.0
Router E
hostname Router E
!
source-bridge ring-group 2000
dlsw local-peer peer-id 150.150.97.1 group 1 promiscuous
dlsw remote-peer 0 tcp 150.150.96.1
!
interface loopback 0
ip address 150.150.97.1 255.255.255.192
!
interface tokenring 0
no ip address
ring-speed 16
source-bridge 97 1 2000
source-bridge spanning
!
router eigrp 202
network 150.150.0.0
DLSw+ with SDLC Multidrop Support Configuration Examples
In the following example, all devices are type PU 2.0:
interface serial 2
mtu 4400
no ip address
encapsulation sdlc
no keepalive
clockrate 19200
sdlc role primary
sdlc vmac 4000.1234.5600
sdlc address C1
sdlc xid C1 05DCCCC1
sdlc partner 4001.3745.1088 C1
sdlc address C2
sdlc xid C2 05DCCCC2
sdlc partner 4001.3745.1088 C2
sdlc dlsw C1 C2
The following example shows mixed PU 2.0 (device using address C1) and PU 2.1 (device using address
C2) devices:
interface serial 2
mtu 4400
no ip address
encapsulation sdlc
no keepalive