Filter
Top Products
4-23
Cisco 6500/7600 Manager User Guide
OL-2209-01
Chapter 4 Deploying the C65/76M
Deployment and Commissioning Process
Figure 4-16 Manually Deployed and Commissioned Catalyst 6506 Switch
If an error is encountered when the object is commissioned, the Network Element
object might go into the Mismatched or Lostcomms state and an alarm would be
raised.
The Network Element is placed in the Mismatched state if the IP address specified
during the deployment wizard does not correspond to the device type that was
deployed. If this occurs, the Network Element object must be deleted from CEMF
and redeployed with the correct IP address or type.
The Network Element is placed in the Lostcomms state if the SNMP read
community string specified in during the deployment wizard is incorrect. If this
occurs, open the Network Element dialog box, decommission the Network
Element object, go to the SNMP tab (Figure 4-6) and enter the correct SNMP read
community, and then recommission the Network Element object.