Filter
Top Products
Eicon Card Configuration Details 53
53
53
Note the T20, T21, T22 and T23 in the Eicon WAN Service configuration
usually match the corresponding ones in the DMS100 datafill MPCLINK
table.
a. In the Advanced Tab
b. Max retry count N3 3
c. Data link layer HDLC
5. Select the HDLC node. Enter the following values:
a. Check the box entitled FRMR to RRC/RNRC/REJC with P=0
b. Leave the Disable Automatic DTE/DCE Settings for Dialup
Link box unchecked
Max Size Frame N1 (octets) 144
Window K 7
In the Advanced Tab, the values displayed should be the following:
Link Setup
Active
Sequence
Normal
Max retry count (N2)
10
Check Point T1
5000
Ack Delay T2
1200
Idle Probe T3
25000
HDLC X.32 Service Sel.
NONE
Leave GOSIP box unchecked
6. Select the Direct node. Enter the following values:
R1(on) -> DTR(on) delay
0
DSR(on)->RTS(on) delay
0
DSR de-bouncing delay
100
Max delays for a connection establish.
15
7. Select the Sync icon. Enter the following values:
Line interface
Leased
Duplex
Full
Type
Point-to-Point
Modem interface
V35/RS232
Clocking
External
Data encoding
NRZ