Filter
Top Products
2-23
Cisco IE 3010 Switch Hardware Installation Guide
78-19581-02
Chapter 2 Switch Installation
Replacing the SD Flash Memory Card
Replacing the SD Flash Memory Card
Step 1 Locate the SD flash memory card slot on the cable-side of the switch.
Step 2 Use a number-1 Phillips screwdriver to loosen the captive screw. See Figure 2-20.
Figure 2-20 Loosening the Captive Screw
Step 3 Pull the cover open, and pull the cover tab from the hinge. See Figure 2-21.
Figure 2-21 Removing the SD Slot Cover
208563
208566