Filter
Top Products
14
Cisco ME 6500 Series Ethernet Switch Installation Note
78-17360-02
Installing the Switch
Rack-Mounting the Switch
Use six 10-32 x 3/4-inch or 12-24 x 3/4-inch Phillips machine screws to attach the L brackets to the
rack. (See Figure 5.)
Figure 5 Rack-Mounting the Switch
Desktop-Mounting (Optional)
If you are installing the ME 6524 chassis as a free-standing unit instead of rack-mounting the chassis,
you need to install the four rubber feet that shipped with the chassis. To install the four rubber feet,
follow these steps:
Step 1 Place the switch chassis upside down on a flat surface.
Step 2 Attach the four adhesive-backed rubber pads (included in the accessory kit) to the recessed areas on the
bottom of the switch chassis. (See Figure 6.)
Step 3 Place the switch chassis right-side up and position the chassis as close as possible to where the DC
source and the system ground are located.
147980
INPUT
OK
OUTPUT
OK
FAN
OK
INPUT
OK
OUTPUT
OK
FAN
OK
o
o
+
-
+
-
Rear-mounting position
Front-mounting position
Catalyst 6524GS
PS
1
U
SB
F
LA
SH
P
S2
FAN
STAT
US
C
O
NSO
LE
1
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
15
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
12-24 or 10-32 Phillips-head
machine screws
12-24 or 10-32 Phillips-head
machine screws