Filter
Top Products
39
Chapter 3: Configuring the Network Storage System
(NSS)
Getting Started Guide
Chapter
3
snapshots is greater, the amount of the reserve should be greater. Or, if there is a heavy amount of
activity on the volume, set a higher reserve.
To create a snapshot for a volume:
1. From the Manager Menu, click Storage Snapshots.
The Storage Snapshots page appears.
2. From the New Snapshot table, click the volume for which you are creating the snapshot.
3. Depending on the frequency, use the first part of the Every field to enter a unit of time. Tab to the
second part of the Every field, and then click the snapshot frequency (that is, hours or days). For
example, set the first part of the field to “7”, and the second part to “Days” to take a snapshot
once every week.
4. Use the At: fields to set up the timing for the snapshot. For example, if the frequency is set to
Days, set the hour and minute of the day at which you want the snapshot to be taken. Note:
When entering the hour, use the 24-hour clock. For example, 3 p.m. should be entered as
15:00. When the frequency is set to Hours, you can only edit the minutes part of the At: field.
NOTE: This feature is only available on NSS6000 series
NAS units.