30
Release Notes for Cisco ONS 15327 Release 3.3
OL-2671-01
New Features and Functionality
CTAGs
In accordance with Telcordia GR-831, all TL1 commands must include a CTAG. Commands without
CTAGs will be rejected by TL1 with the error Invalid Correlation Tag (IICT).
Test Access
TL1 Test Access enables you to monitor and test circuits. Commands to connect, disconnect and change
the test access (TACC) and test access connections have been added to TL1 for ONS 15327 Release 3.3.
Refer to the Cisco ONS 15454 and Cisco ONS 15327 TL1 Command Guide, Release 3.3 for more
information.
Additional Feature Support
The following feature enhancements have been added to TL1 for Release 3.3.
• Support for STS9c and 24c
• Enhanced Setting of Timing Source (RTRV-NE-GEN, ED-NE-GEN)
• Support for reporting database changes
New Alarms as of ONS 15327 Release 3.3
The following TL1 alarms are new as of ONS 15327 Release 3.3:
• PEER-NORESPONSE
• MFGMEM
New AIDs as of ONS 15327 Release 3.3
TL1 supports the following new AIDs as of ONS 15327 Release 3.3.
• BLSR
• ALL (added to the VT1_5 AID table)
Parameter Value Changes as of ONS 15327 Release 3.3
TL1 supports the following parameter value changes as of ONS 15327 Release 3.3.
• TMPER input/output value changed from 15MIN to 15-MIN
• SENDDONOTUSE changed to SENDDUS
• BLSR_MODE (new parameter)
• BLSR_TYPE (new parameter)
• MOD-TACC
• TACC-MODE
New Conditions as of ONS 15327 Release 3.3
TL1 supports the following new conditions as of ONS 15327 Release 3.3.