Filter
Top Products
34
Release Notes for Cisco ONS 15327 Release 3.3
OL-2671-01
New Features and Functionality
Release 1.0.X TL1 Commands Changed as of Release 3.3
TL1 COMMAND DESCRIPTION OF CHANGES
ALW-MSG-ALL
INH-MSG-ALL
The two commas at the end of the command are not needed anymore.
ALW-SWDX-EQPT Semi-colons after the CTAG field are not required anymore.
DLT-CRS-<STS_PATH>
DLT-CRS-VT1
Trailing semi-colons after the CTAG are optional.
ED-BITS Added support for the Sync Message field. An extra colon is needed after CTAG
field. The colon after the PST field is not necessary. The Name string in Name/Value
parameter changed.
ED-EC1 Added support for the Rx Equalization attribute for an EC1 port. The extra colon
after the PST field is not required anymore.
ED-T1 Removed support for the ID field. Three colons after the CTAG field are now
required, instead of two. The extra colon after the PST field is not required anymore.
Added support for Test Access.
ED-T3 Three colons are needed after CTAG field, instead of two. The extra colon after the
PST field is not required anymore. Added support for Test Access.
ED-<OCN_TYPE> Added support for the send DUS and Synchronous Status Message fields. The extra
colon after the PST field is not required anymore. Three colons are needed after the
CTAG field instead of two.
ENT-CRS-<STS_PATH> Cross-connect types are optional. The default is 2WAY. Supported Cross Connect
types are now limited to 1WAY and 2WAY.
ENT-FFP-<OCN_TYPE>
ED-FFP-<OCN_TYPE>
An extra colon after the CTAG field is required. Name field in name/value
parameters have changed.
ED-EQPT
ENT-EQPT
RTRV-EQPT
This family of commands was functionally expanded to edit/enter/retrieve
equipment attributes and electrical 1:1 and 1:N Protection Group. Use these
commands instead of ED/ENT/RTRV-FFP-EQPT.
ED-USER-SECU Added support for a NEW USER ID field. Fields are now positional instead of
name/value pairs.
ENT-USER-SECU An extra comma is needed after the PASSWORD field.
ED-<STS_PATH> Added support for following fields: Revertive Mode, Revertive Time, Expected Path
Trace, Path Trace Message, and Path Trace Mode. Added support for Test Access.
INIT-SYS Phase Field (Level of Initialization) is not supported anymore.
OPR-LPBK-<MOD2_IO>
RLS-LPBK-<MOD2_IO>
The Loopback Type field is now optional.