Filter
Top Products
35
Release Notes for Cisco ONS 15327 Release 3.3
OL-2671-01
New Features and Functionality
OPR-PROTNSW-<OCN_TYPE> Added support for the SWITCH command field.
INIT-REG-<MOD2>
RTRV-PM-<MOD2>
Added support for an optional Location field. Now only one comma is needed
(instead of two) after the Time Period field.
REPT ALM BITS
REPT ALM SYNCN
Output – The Condition description field is now optional.
REPT ALM <MOD2ALM>
REPT ALM EQPT
REPT EVT <MOD2ALM>
The Description and Equipment Type fields are now optional.
REPT ALM EVT The positions of the Description and Equipment Type fields have changed.
REPT EVT SYNCN Output – Condition and Condition Description are now optional. Requires 7
commas (instead of 6) after the Condition Effect field. Added support for the Aid
Type field.
RTRV-ALM-BITS
RTRV-ALM-SYNCN
Output – Added support for the Aid Type field.
RTRV-BITS Output – Added support for the Sync Messaging field.
RTRV-COND-ALL One less comma is needed after the Condition field.
RTRV-COND-BITS
RTRV-COND-SYNCN
Requires two commas (instead of three) after the Condition field.
RTRV-CRS-<STS_PATH>
RTRV-CRS-VT1
Semi-colons after the CTAG are no longer required.
RTRV-ALM-EQPT
RTRV-COND-EQPT
RTRV-ALM-MOD2
RTRV-COND-MOD2
RTRV-ALM-ALL
Use one less comma after the Service Affect field.
RTRV-EC1 The four colons after the CTAG field are now optional.
Output – Added support for the Rx Equalization field.
RTRV-FFP-EQPT Output – Name field in Name/Value parameters changed.
RTRV-INV Output – Requires two colons (instead of one) after the Aid Type field.
RTRV-LOG Requires an additional logname field.
RTRV-<OCN_TYPE> The four colons after the CTAG field are now optional.
Output – Added support for the following fields: Sync Status Messaging, Send DUS,
Ring ID, and BLSR Type. Dropped support for Revertive Time.