Filter
Top Products
31
Release Notes for Cisco ONS 15327 Release 3.3
OL-2671-01
New Features and Functionality
• NHSWPR - Inhibit switch to protect request on equipment
• NHSWWKG - Inhibit switch to working request on equipment
The following new BER alarm conditions have been added:
Conditions Replaced as of ONS 15327 Release 3.3
The SWFTDWN condition has been changed to SFTWDOWN.
Changed Conditions as of ONS 15327 Release 3.3
The following condition is changed as of ONS 15327 Release 3.3.
The FAIL_DS3_NE_FRM_MISMATCH condition is renamed to DS3-MISM.
New Parameters as of ONS 15327 Release 3.3
The following TL1 parameters are new in the Condition table (new conditions) as of ONS 15327 Release
3.3:
EQPT-MISS — Replaceable equipment/unit is missing
EXERCISE-RING-FAIL — Exercise ring failed
EXERCISE-SPAN-FAIL — Exercise span failed
EXERCISE-RING-REQ — Exercise ring request
EXERCISE-SPAN-REQ — Exercise span request
EXERCISING-RING — Exercise ring completed
EXERCISING-SPAN — Exercise span completed
FE-EXERCISING-RING — Far end exercise ring completed
FE-EXERCISING-SPAN — Exercise span completed
WTR-RING — SONET ring is in Wait to Restore state
The following TL1 parameters are new in the ALL_MONTYPE table as of ONS 15327 Release 3.3:
• CVS
• ESS
• SESS
Condition Alarm Description Type
SD-L BER Threshold exceeded for
Signal Degrade
Line
SD-P BER Threshold exceeded for
Signal Degrade
Path
SF-L BER Threshold exceeded for
Signal Failure
Line
SF-P BER Threshold exceeded for
Signal Failure
Path